Current location：Home » Air separation knowledge » FAQ

What should be done about the overheating of membrane separation nitrogen making machine?

Article Source：Suzhou Shenyue Purification Website：www.szshenyue.comTime：2017-3-15Pageviews ：851

Core prompt：The temperature control of membrane separation nitrogen making machine is completed by thermocouple. The temperature controller is adjusted automatically according to PID, and the time proportion is used to control the SSR to control the heater.

The temperature control of 1. membrane separation nitrogen making machine is completed by thermocouple, the temperature controller is adjusted automatically according to PID, and the time proportion is used to control the SSR to control the heater.

2. membrane separation nitrogen generator protection device: mainly to protect the heater, because the temperature is too high will damage the membrane group. It is composed by overheating protection switch and entrance pressure switch two, when the temperature rose to 50 degrees out of control due to the left, overheating protection switch will automatically cut off the power switch control system, to prevent the temperature continues to rise, when the temperature dropped to 35 degrees Celsius when the automatic closing switch protection. In order to avoid heating in the absence of air flow, the pressure switch is closed when the air pressure is above 0.4Mpa, and the heating system works. This can protect the air from heating without air supply.
3. the control part adopts fuse breaker, level drop transformer, micro processing controller and contact type temperature setting point controller, so as to achieve the required precision and easy to use.

Next：How to choose a high quality durable and cheap nitrogen making machine? Previous： Matters needing attention in the use of normal temperature PSA pressure swing adsorption nitrogen making machine (nitrogen equipment)

Keywords：PSA Hydrogen Production，Nitrogen making machine in metallurgical industry

News

Contact Us

Tel：0512-65892711

E-mail：suzhoushengyu@163.com

Mob：Mr.Xu 15606131715

Add：52, Qinfeng Road, Suzhou National new and hi-tech industrial Development zone, Jiangsu

Devote to become the national brand of gas industry
Provide customers with of international standard high quality product
which is "0" defects R & Dproductioncustomization

What should be done about the overheating of membrane separation nitrogen making machine?

Recommended Products

News

Recommended Products

Contact Us

Devote to become the national brand of gas industryProvide customers with of international standard high quality productwhich is "0" defects R & Dproductioncustomization

What should be done about the overheating of membrane separation nitrogen making machine?

Recommended Products

News

Recommended Products

Contact Us

Devote to become the national brand of gas industry
Provide customers with of international standard high quality product
which is "0" defects R & Dproductioncustomization