R & DWhat are the precautions for the safe use of nitrogen producing devices?
Article Source：Suzhou Shenyue Purification Website：www.szshenyue.comTime：2017-3-15Pageviews
：826
Core prompt：The nitrogen making device uses air as raw material and carbon molecular sieve as adsorbent. The method of separation of nitrogen and oxygen by selective adsorption of carbon and oxygen on carbon molecular sieve using pressure swing adsorption principle i
The nitrogen making device uses air as raw material and carbon molecular sieve as adsorbent. The method of separation of nitrogen and oxygen by selective adsorption of carbon and oxygen on carbon molecular sieve using pressure swing adsorption principle is generally called PSA nitrogen making. The main parts of the nitrogen plant include: adsorption tower, PLC controller, nitrogen dust filter, nitrogen tank. Compressed air is used as raw material and power to produce nitrogen from 95% to 99.9995% purity by pressure swing adsorption. Nitrogen device needs to be in a well ventilated, dust is small, no water, no special water chamber, or used in a clean inside the tunnel.
Below we specifically talk about nitrogen production device safety precautions:
1, before starting, should carefully check the entire nitrogen device, to confirm that no tools, parts or other objects remain in the air compressor.
2, when the nitrogen device is started, the emptying valve should be in the state of emptying, so as to avoid the overpressure of the air compressor.
3, the oil system shall be carried out near the welding operation, welding or other methods can be used to modify any pressure vessel.
4. Regularly check the reliability of safety devices (such as safety valves).
5. The maintenance and maintenance of the nitrogen plant must be carried out under the condition of stop or power failure.
Below we specifically talk about nitrogen production device safety precautions:
1, before starting, should carefully check the entire nitrogen device, to confirm that no tools, parts or other objects remain in the air compressor.
2, when the nitrogen device is started, the emptying valve should be in the state of emptying, so as to avoid the overpressure of the air compressor.
3, the oil system shall be carried out near the welding operation, welding or other methods can be used to modify any pressure vessel.
4. Regularly check the reliability of safety devices (such as safety valves).
5. The maintenance and maintenance of the nitrogen plant must be carried out under the condition of stop or power failure.
Next：How about the switching process of the nitrogen making machine?
Previous：Period
Keywords：PSA Hydrogen Production，Nitrogen making machine in metallurgical industry
News
Recommended Products
Tel：0512-65892711
E-mail：suzhoushengyu@163.com
Mob：Mr.Xu 15606131715
Add：52, Qinfeng Road, Suzhou National new and hi-tech industrial Development zone, Jiangsu
